LUMEN Series · Aqua

The wireless
pool luminaire.
World's first.

Retrofits your existing pool niche in under an hour. No draining. No electrician. No construction. Power transfers wirelessly inside the fixture — the lamp has no electrical contacts whatsoever.

Request a Sample How It Works
Drop-In Retrofit
— Fits existing pool niches. Uses existing wiring. No construction required.
0
Exposed Contacts
Inside the pool. Ever.
30
Seconds
Lamp swap. Pool stays full.
IP68
Protection
Full submersion rated.
316L
Stainless
Marine-grade body.
18W
Output
High-output LED module.
01 · How It Works

Wireless power
inside the fixture.

The transmitter coil is embedded in the fixture body. The receiver coil is in the lamp. Power crosses the gap wirelessly — no pins, no contacts, no corrosion path into the water.

1
Step 01
Fixture Into the Niche
The Aqua fixture body drops into the existing pool niche and connects to the existing conduit wiring. No new cabling. No construction. No pool drainage. The body houses the TX coil and resonant drive electronics — permanently installed.
2
Step 02
Power Transfers Wirelessly
When the lamp seats into the fixture, the TX and RX coils align across a sealed air gap. 6.78 MHz resonant inductive coupling transfers power to the lamp — no electrical contact between body and lamp. No path for water ingress.
3
Step 03
Lamp Replaced in 30 Seconds
Insert the bayonet key. Rotate. The lamp module slides free. Insert new lamp. Rotate back. Pool stays full. No electrician required. Any maintenance staff member can replace it — with the pool in use if needed.
02 · Retrofit

Your existing pool.
Upgraded in an hour.

Aqua is designed as a direct replacement for any standard pool luminaire niche. The fixture body matches common niche dimensions. Your existing conduit and wiring stays in place. There is nothing to dig, seal, or commission.

Once installed, the fixture body never needs to be touched again. The only maintenance task is lamp replacement — performed from inside the pool in 30 seconds, without draining.

01 ·
Remove existing luminaire from the pool niche. Disconnect from conduit wiring.
02 ·
Insert Aqua fixture body into the niche. Connect to existing wiring. Seal.
03 ·
Seat the lamp module into the fixture body. The wireless link establishes automatically.
04 ·
Done. The fixture body is permanent. Future lamp replacements take 30 seconds — no specialist required.
03 · Applications

Every water environment.
One wireless platform.

🏊
Swimming Pools
Private villas, hotel pools, residential complexes. Retrofit existing niches or specify for new construction. Lamp replaceable without draining.
💆
Spas & Jacuzzis
High-temperature environments demand sealed, contact-free design. Aqua's wireless architecture eliminates corrosion from mineral-rich spa water.
⛲
Water Features
Fountains, reflection pools, water walls and ornamental features. Wireless operation eliminates the contact failure that conventional luminaires suffer in feature environments.
🌊
Infinity Edges
Precise beam control for infinity edge illumination. No maintenance disruption to landscaping or overflow systems — the pool never needs to be drained for a lamp change.
04 · Specifications

Technical
specifications.

Power Output18W
Transfer Frequency6.78 MHz resonant inductive coupling
Protection RatingIP68 — full submersion rated
Body Material316L Marine-grade stainless steel
Lamp Interface3-pin bayonet — tool-free, 30-second replacement
Electrical ConnectionStandard pool conduit — compatible with existing wiring
Retrofit CompatibilityStandard pool luminaire niches
Lamp ContactsNone — fully wireless power transfer
Operating Temperature–20°C to +60°C
CertificationsECAS certification in progress (Bureau Veritas)
05 · Get in Touch

Request an
Aqua sample.

Location
Dubai, United Arab Emirates

Lead time
Sample units available on request.
We respond within 24 hours.

Also available
Terra — Inground  ·  Arch — Linear